ROV Operated Equipment & Tools

14 results

Diverless Installed Blind Flange

Our diverless installed blind flange makes it possible to install blind flanges with…

Diverless Installed Blind Flange

Our diverless installed blind flange makes it possible to install blind flanges with the use of ROV only. This limits the operational planning and installation time.

15 Te Subsea Winch

The Imenco 15Te Subsea Winch is intended for offshore subsea pulling operations by…

15 Te Subsea Winch

The Imenco 15Te Subsea Winch is intended for offshore subsea pulling operations by use of ROV.

ROV Switch

The ROV Switch is a panel mounted ROV handle that is used as…

ROV Switch

The ROV Switch is a panel mounted ROV handle that is used as an actuator on standard valves. The ROV Switch is used for a variety of applications and valves depending upon our clients’ needs. The ROV Switch is designed for panel mounting and can be delivered with several sizes and…

TMS – Tether Management System

The Tether Management System makes the ROV more manoeuvrable and increases its range…

TMS – Tether Management System

The Tether Management System makes the ROV more manoeuvrable and increases its range without moving the vessel or rig. The purpose of the TMS is to lengthen and shorten the tether in order to minimize the effect of cable drag during underwater currents. The TMS is engaged to the ROV to…

Valve Retrieval Tool

The Valve Retrieval Tool is an emergency recovery tool that can operate subsea…

Valve Retrieval Tool

The Valve Retrieval Tool is an emergency recovery tool that can operate subsea valves with broken handles. The tool clamps around free rods or stems and allows the ROV to rotate the tool. This will make it possible for the ROV to operate valves with damaged handles.

Fishtail With Flexible Joint

The Fishtail with Flexible Joint is a handle for installing a variety of…

Fishtail With Flexible Joint

The Fishtail with Flexible Joint is a handle for installing a variety of ROV equipment. The ROV use this handle to operate and handle tooling and/or valves. Fishtail casted in 316-material with flexible joint embedded in rubber. The Fishtail has an adapter plate that makes it easy to assemble / disassemble and…

ROV Panel

The ROV Panel is used for subsea tooling operations. The panel often includes…

ROV Panel

The ROV Panel is used for subsea tooling operations. The panel often includes several ROV Switches to operate different functions. This solution is flexible and can be used in a variety of applications and functions. Imenco has produced ROV panels in several varieties and for multiple uses. The ROV panel can easily…

ROV Tensioning Tool

The Rov Tensioning Tool is easily operated by a T4. Bolt tensioning and…

ROV Tensioning Tool

The Rov Tensioning Tool is easily operated by a T4. Bolt tensioning and nut spinning performed by one tool. It can be set to pre-tension bolts from 0-1500 kN/ M28-M60 (larger dimensions on request). By use of the Imenco special design thread adapter, the risk of thread damage is eliminated.…

3 Finger Manipulator Jaw

The Imenco 3 finger manipulator front adapter is made in high strength stainless…

3 Finger Manipulator Jaw

The Imenco 3 finger manipulator front adapter is made in high strength stainless steel and will make an exact fit to Schilling’s Titan II/III/IV and Orion manipulators. The front adapter assembly comes complete with actuation plate and piston and all necessary gaskets and will replace the standard parallel grip by…

4 Finger Manipulator Jaw

The Imenco 4-finger front adapter is made in high strength stainless steel and…

4 Finger Manipulator Jaw

The Imenco 4-finger front adapter is made in high strength stainless steel and will make an exact fit to Schilling’s Titan II/III/IV and Orion manipulators. It is perfect to use on T-bar grips and for other applications that require a steady grip. The front adapter assembly comes complete with actuation…

Mantis ROV operated Saw

Imenco has over the 10 past years delivered a range of subsea cutters…

Mantis ROV operated Saw

Imenco has over the 10 past years delivered a range of subsea cutters for different subsea removal projects. • Chain cutting • Pipe cutting • Bolt cutting • Other structures

Stinger ROV Operated Drilling Tool

The Imenco Stinger ROV Drilling Tool is a portable hydraulically operated drilling machine…

Stinger ROV Operated Drilling Tool

The Imenco Stinger ROV Drilling Tool is a portable hydraulically operated drilling machine which can be operated by a work class ROV. It is designed for subsea drilling operations on a variety of applications and steel thicknesses.

Hydraulic Compensators

Imenco compensators are made from polycarbonate tubing, aluminium flanges and stainless steel springs.…

Hydraulic Compensators

Imenco compensators are made from polycarbonate tubing, aluminium flanges and stainless steel springs. They are prepared for installation of optional warning compensation volume sensors. Subcon proximity sensors are normally used. Hydraulic connection(s) are done on top with two JIC 1/2” fittings. All nuts and bolts/rods are stainless steel.

5 Te Subsea Tugger Winch

The Imenco 5Te Stand Alone Subsea Tugger Winch is intended for subsea pulling…

5 Te Subsea Tugger Winch

The Imenco 5Te Stand Alone Subsea Tugger Winch is intended for subsea pulling operations.

News & Events

See all news