Our Luxury Yacht Fuelling Systems are built with the owners requirements in mind.…
Our Luxury Yacht Fuelling Systems are built with the owners requirements in mind. By combining worldwide requirements for refuelling aircrafts in an offshore environment and using the latest technology available our Luxury Yacht Fuelling Systems are built with the owners requirements in mind are not only the safest in the…
Coalescer Separator Dirt Defence Micro Filter
Coalescer Separator Dirt Defence Micro Filter
International regulations states that: “personnel assigned supervisory and operating responsibilities should be certified…
International regulations states that: “personnel assigned supervisory and operating responsibilities should be certified as properly trained and competent to undertake systems maintenance, inspections and refuelling of aircraft”. (Reference to 7th edition of CAP 437, chapter 8, section 1.2). Also the Norwegian regulations stated that all personnel shall be highly trained…
Imenco has developed a continuous aviation fuel water monitor replacement system together with…
Imenco has developed a continuous aviation fuel water monitor replacement system together with the leading aviation fuel filtration and sensor manufacturer Faudi Aviation GmbH. The system is a product in our new fuelSCAN series. We are experiencing high demand for these systems as it is the only globally approved solution…
High Quality fuel hoses, For Helicopter Refueling ISO 1825, with Stainless Steel connections…
High Quality fuel hoses, For Helicopter Refueling ISO 1825, with Stainless Steel connections as standard. This Hose is as stated in CAP 437 Chapter 7 page 129: The fuel delivery hose should be an approved semi-conducting type to EN ISO 1825:2011 Type C, Grade 2, 38 mm (1½”) Lengths as…
For larger fixed installations our Advanced Helicopter Fuelling Systems is the best choice.…
For larger fixed installations our Advanced Helicopter Fuelling Systems is the best choice. For increased aviation and operating safety and ease of use we have developed the most advanced fuelling systems to date.
For windfarm substations with limited crane capacity our Windfarm Substation Helicopter Refuelling Systems…
For windfarm substations with limited crane capacity our Windfarm Substation Helicopter Refuelling Systems are the preferred choice by our customers. Our Windfarm Substation Helicopter Refuelling systems are designed according to CAP437 and special project specific requirements for Windfarm projects.
AVCAT Fuelling systems designed to deliver clean and water free fuel to helicopters…
AVCAT Fuelling systems designed to deliver clean and water free fuel to helicopters and aircraft. We have a wide range of standard units and custom built systems to meet any requirement from our clients.
Chapter 7 Point 3.6.1 b in CAP437 7th Edition states that the pumping…
Chapter 7 Point 3.6.1 b in CAP437 7th Edition states that the pumping system in offshore fuelling systems should be equipped with an interlock bonding system.
Our Walk-in Dispenser Unit is an upgraded version of our standard Dispenser Unit…
Our Walk-in Dispenser Unit is an upgraded version of our standard Dispenser Unit and fulfills all requirements for Helicopter Fuelling Systems worldwide.
Imenco’ s Diesel Stations are designed and manufactured as a standard product, which…
Imenco’ s Diesel Stations are designed and manufactured as a standard product, which can easily be adapted / modified to meet any special requirements of the individual Client.
Imenco’ s Work Boat Refueling Stations are designed and manufactured as a standard…
Imenco’ s Work Boat Refueling Stations are designed and manufactured as a standard product, which can easily be adapted / modified to meet any special requirements of the individual Client.
Separator elementes are used in the 2nd stage of a filter water separator.
Separator elementes are used in the 2nd stage of a filter water separator.
Manual aviation fuelling nozzle for overwing service, flow rate up to 400 litres/min.
Manual aviation fuelling nozzle for overwing service, flow rate up to 400 litres/min.
When high efficiency filtration and separation is required. Filter water separators are fitted…
When high efficiency filtration and separation is required. Filter water separators are fitted with coalescer and separator elements and used on aircraft refuelling vehicles, hydrant dispensers, fixed fuelling installations, tank farms as well as refineries.
These high efficiency filters are used wherever there is a demand for high…
These high efficiency filters are used wherever there is a demand for high quality, economic and reliable filtration. They continuously remove fine particulate such as rust, dirt, sand and pipe scale from aviation fuel.
The main function of a clay filters is to remove unwanted surface active…
The main function of a clay filters is to remove unwanted surface active agents, colourings and other additives which may be present.
For our Helicopter Refuelling Systems we have a wide range of Laydown Skids for…
For our Helicopter Refuelling Systems we have a wide range of Laydown Skids for both transportable tanks and static storage tanks. The laydown skid range is one or two storage tanks or from a single transportable tank and up to 8 transportable tanks. A heavy duty bumper will in addition to…
The storage tanks for our Helicopter Refuelling systems will be mounted in a…
The storage tanks for our Helicopter Refuelling systems will be mounted in a skid together with a pump unit. The Storage Tanks will be piped up to the pump unit through hard piping and remote controlled valves for easy system control. The storage tanks can be delivered with single or…
The Transportable tanks are manufactured according to ASME VIII and approved by DNV…
The Transportable tanks are manufactured according to ASME VIII and approved by DNV or ABS. The fuel tanks are made from stainless steel eliminating maintenance and increases life time of the tanks. Transportable tanks with frames according to DNV 2.7-1. Transportable Tank 2700 to 3000 liters, DNV 2.7.1, IMO 1,…
A separate cabinet with fuel test and recycling equipment is offered for optimal…
A separate cabinet with fuel test and recycling equipment is offered for optimal environmental control and safe operation.
Imenco’ s Defuelling Unit Stations are designed and manufactured to defuel helicopters at…
Imenco’ s Defuelling Unit Stations are designed and manufactured to defuel helicopters at the recommended flow rate for each helicopter. Upstream defuel pump there will be a filter vessel and instrumentation. Defueling unit can work as a separate unit with defueling tank or as a part of a bigger system.…
With our main office located “in the heart” of the Norwegian Oil and…
With our main office located “in the heart” of the Norwegian Oil and Gas Industry, we can easily cover all parts of the Norwegian west coast for small and large Offshore Service & Inspections on your installation. But our services reaches far out of Norway, with our network of branch…
Many installations have their own set of Transportable Tanks, but with high activity…
Many installations have their own set of Transportable Tanks, but with high activity in the oil and gas industry, we see that many of the installations are constantly moving. Some of the locations are in remote areas, making the fuel consumption higher than normal. In these cases rental tanks can…
Our standard Dispenser Unit is designed to fulfill requirements for Helicopter Fuelling Systems…
Our standard Dispenser Unit is designed to fulfill requirements for Helicopter Fuelling Systems worldwide and can be upgraded to project specific requirements.
The Imenco aviation pump unit can be delivered with different options depending on…
The Imenco aviation pump unit can be delivered with different options depending on requirments; with two pumps, either pneumatic or electrical motors. A pump unit with two pumps gives flexibility in case of ongoing maintenance to one of the pumps or motors. The Imenco standard design is based on stainless…
We design manufacture and deliver custom built Helicopter Refuelling Systems according to client’s…
We design manufacture and deliver custom built Helicopter Refuelling Systems according to client’s needs and specifications, conforming to international and local standards in addition to class companies like DNV, ABS and BV.
Our basic aviation fuel recycle systems design is based on a stainless steel…
Our basic aviation fuel recycle systems design is based on a stainless steel drip tray/base frame and enclosed with an aluminium shelter of high offshore quality, equipped with sliding door. This gives the unit a minimal need for maintenance and the operations will be performed in a dry, sheltered and…