Fuelling Units & Products

12 results

Offshore AFGUARD Water Monitoring System

Imenco has developed a continuous aviation fuel water monitoring system together with the…

Offshore AFGUARD Water Monitoring System

Imenco has developed a continuous aviation fuel water monitoring system together with the leading aviation fuel filtration and sensor manufacturer Faudi Aviation GmbH. The system is a product in our new fuelSCAN series. Our system can be installed as a retrofit solution for offshore fuel systems as well as in…

HOSS Helicopter Operation Surveillance System

The Imenco 0465-6002 HOSS ALLSS PTZ ultra low light camera makes up the…

HOSS Helicopter Operation Surveillance System

The Imenco 0465-6002 HOSS ALLSS PTZ ultra low light camera makes up the core of the Imenco Helicopter Operations Surveillance System (HOSS) which has built an excellent reputation in providing the bridge with real time critical monitoring of the flight deck, even in very low light conditions, on board naval…

Dispenser Unit

Our standard Dispenser Unit is designed to fulfill requirements for Helicopter Fuelling Systems…

Dispenser Unit

Our standard Dispenser Unit is designed to fulfill requirements for Helicopter Fuelling Systems worldwide and can be upgraded to project specific requirements.

Walk-in Dispenser Unit

Our Walk-in Dispenser Unit is an upgraded version of our standard Dispenser Unit…

Walk-in Dispenser Unit

Our Walk-in Dispenser Unit is an upgraded version of our standard Dispenser Unit and fulfills all requirements for Helicopter Fuelling Systems worldwide.

Pump Unit

The Imenco aviation pump unit can be delivered with different options depending on…

Pump Unit

The Imenco aviation pump unit can be delivered with different options depending on requirments; with two pumps, either pneumatic or electrical motors. A pump unit with two pumps gives flexibility in case of ongoing maintenance to one of the pumps or motors. The Imenco standard design is based on stainless…

Laydown Skid

For our Helicopter Refuelling Systems we have a wide range of Laydown Skids for…

Laydown Skid

For our Helicopter Refuelling Systems we have a wide range of Laydown Skids for both transportable tanks and static storage tanks. The laydown skid range is one or two storage tanks or from a single transportable tank and up to 8 transportable tanks. A heavy duty bumper will in addition to…

Storage Tanks

The storage tanks for our Helicopter Refuelling systems will be mounted in a…

Storage Tanks

The storage tanks for our Helicopter Refuelling systems will be mounted in a skid together with a pump unit. Capacities from 3000 – 30000 Litres. The storage tanks can be delivered with single or twin chambers in stainless steel or duplex. Dual and twin chamber tanks gives a high flexibility in…

Transportable Tanks

2.000 – 4.000 liters Tote Tanks. The tanks are manufactured according to ASME…

Transportable Tanks

2.000 – 4.000 liters Tote Tanks. The tanks are manufactured according to ASME VIII and approved by DNV or ABS. Transportable tanks with frames according  to DNV 2.7-1. The fuel tanks are made from stainless steel eliminating maintenance and increases life time of the tanks. •  Transportable Tank 2700 to…

Sampling & Recycle Unit

A separate cabinet with fuel test and recycling equipment is offered for optimal…

Sampling & Recycle Unit

A separate cabinet with fuel test and recycling equipment is offered for optimal environmental control and safe operation.

Defuelling Unit

Imenco’ s Defueling Stations are designed and manufactured to defuel helicopters at the…

Defuelling Unit

Imenco’ s Defueling Stations are designed and manufactured to defuel helicopters at the recommended flow rate for each helicopter.  Upstream defuel pump there will be a filter vessel and instrumentation. Defueling unit can work as a separate unit with defueling tank or as a part of a bigger system. Stations…

Foam/Deluge Unit

Imenco’ s foam unit is typically designed for 1-3% AFFF foam. There are…

Foam/Deluge Unit

Imenco’ s foam unit is typically designed for 1-3% AFFF foam. There are different solutions pending on main fire water system design. Normally our system will be delivered with a pressure control valve so inlet pressure can variety and we can still keep the design pressure downstream our deluge valve.…

Automatic Interlock Bonding Safety System

Chapter 7 Point 3.6.1 b in CAP437 7th Edition states that the pumping…

Automatic Interlock Bonding Safety System

Chapter 7 Point 3.6.1 b in CAP437 7th Edition states that the pumping system in offshore fuelling systems should be equipped with an interlock bonding system.

News

See all news