We single-handedly carry out all testing and power calculations of all models according…
We single-handedly carry out all testing and power calculations of all models according to the relevant standards. Imenco performs engineering with complete solutions from specifications and concept to design and strength calculation. We have our premier experience in the areas of drill floor, subsea and downhole. Our skilled development department…
Interface to FMC top release guideposts without extension profile.
Interface to FMC top release guideposts without extension profile.
The Imenco Guidepost Extension GPE can be installed onto the top of 8in…
The Imenco Guidepost Extension GPE can be installed onto the top of 8in guideposts for temporary increase of the guiding length. The GPE makes it possible to use permanent short posts (to avoid them to protrude above e.g. over-trawlable subsea templates) and still obtain proper guiding through narrow roof openings…
The GPEAR M4 model is specifically developed for installations on posts where a…
The GPEAR M4 model is specifically developed for installations on posts where a ROV will have no, or very limited, side access to the external top release sleeve.
The GP adapter acts as a centralizer extending the guiding length for most…
The GP adapter acts as a centralizer extending the guiding length for most types of guideposts. Compatible to guideposts with top receptacle for most common types of guidewire anchors.
Allows for guiding of modules onto guideposts not standing vertically. Consists of an…
Allows for guiding of modules onto guideposts not standing vertically. Consists of an Imenco Slimline Anchor and a range of flexible elements over a wire. Connection to the main upper wire through a Slimline Anchor socket (Potting) Connected/disconnected as a standard Slimline Anchor Protected from overloading by shearpin in the…
The Imenco Bottom Releasable Mini Guidepost MGP-BR is a low weight small guidepost…
The Imenco Bottom Releasable Mini Guidepost MGP-BR is a low weight small guidepost used for e.g. final guiding of tools, pods or other low weight equipment. A lock/ release pin mechanism is integrated in the guidepost receptacle. The post top can adapt GWA-22’ or GWA-22’S Guidewire Anchor.
The MRTR Receptacle is prepared for bolting on structures where the Top Releasable…
The MRTR Receptacle is prepared for bolting on structures where the Top Releasable Mini Guidepost MGP-TR will be installed. The receptacle for Top Releasable Mini Guidepost has a lead-in/ landing cone at top and a shoulder at the bottom end for locking down the guide post.
The Imenco Guidepost Extention GPE GL-4 is developed for installation on top of…
The Imenco Guidepost Extention GPE GL-4 is developed for installation on top of 8in guideposts with Regan GL-4 post top profile. This will provide extension of the guidepost and also allow the use of Imenco Guidewire Anchors. The GPE GL-4 can be handled by the guideline and easily be installed…
The Imenco Anchor Releasable Guidepost GPAR can be used on subsea structures where…
The Imenco Anchor Releasable Guidepost GPAR can be used on subsea structures where there is only access to the post from above. Can be easily installed and retrieved using the Extended Guidewire Anchor or Extended Lifting Anchor. The GPAR can be provided with Post Top profile to fit Guidepost Extensions…
The Imenco Bottom Releasable Guidepost GPBR can be used on subsea structures where…
The Imenco Bottom Releasable Guidepost GPBR can be used on subsea structures where there is access to the Post Receptacle at the bottom end of the post. The locking/ release mechanism is integrated in the guidepost receptacle. The GPAR can be provided with Post Top profile to fit Guidepost Extensions…
The Imenco Top Releaseable Guidepost GPTR can be used on subsea structures where…
The Imenco Top Releaseable Guidepost GPTR can be used on subsea structures where there is side access for ROV at upper part of the post. Can be easily installed and retrieved using Guidewire Anchor or Lifting Anchor. The GPTR is available at different lengths, diameters and strength classes.
Imenco has developed different frames for various use. Guide frames can be delivered with…
Imenco has developed different frames for various use. Guide frames can be delivered with latching system, enabling to lift several frames from bottom to surface by lifting the top frame. Please contact us with your requirements.
The Imenco Standard Guidewire Anchors are recognized by their slender bodies and wider…
The Imenco Standard Guidewire Anchors are recognized by their slender bodies and wider heads. This gives each Imenco Standard Guidewire Anchor a shoulder for resting on the top of the guidepost or receptacle.
The Imenco Guidewire Anchors (or Latches) have been manufactured and used since the…
The Imenco Guidewire Anchors (or Latches) have been manufactured and used since the mid 1980s and are known in the subsea market for their ease of use and dependability. The Imenco Slimline Guidewire Anchors are easily installed and released by ROV or diver. The Imenco Slimline Guidewire Anchors are built from high strength…